FIBREFLEX BANNERWARE FOR CITIES ACROSS THE USA! MainStreet Designs Inc.

FibreFlex Bannerware

BRACKETS ARE EASILY INSTALLED
FIBREFLEX BANNERWARE ALLOWS FOR QUICK BANNER CHANGEOVERS
PROVEN SUPERIOR PERFORMANCE IN SEVERE WEATHER CONDITIONS
STOP BY OR CALL US FOR MORE INFORMATION AND PRICING.
MainStreet Designs proudly serves cities, communities, and organizations
across the United States.

Bannerware Buying Guide

1) Choose Banner Size & Arm Length

Match arm length to banner width (e.g., 18", 24", 30"). Larger banners require stronger arms and secure banding. See Banner sizing tips.

2) Select Mounting Hardware

Use Fibreflex® Brackets for flexibility and durability. For permanent installs, pair with stainless banding, buckles, and a BAND-IT tool. Explore hardware options.

3) Plan for Wind & Exposure

Consider local wind zones and street orientation. Opt for flexible arms and proper spacing to reduce strain. Review install guidelines.

4) Install: Temporary vs. Permanent

Temporary: mechanical straps/bolts (seasonal). Permanent: stainless banding with BAND-IT tool for tamper-resistant, long-term installations. Watch the BAND-IT tool video.

5) Inspect & Maintain

Check tension, band condition, and arm integrity each season. Replace worn components promptly. Get replacement parts.

FIBREFLEX III

Adjustable, Double Base Bracket System

When displaying banners 30″x60″ or larger in areas of strong persistent winds, the FibreFlex III bracketing system is highly recommended. This system has an overall adjustment of 3 inches, allowing easy changeovers and taut banner installation. The FFIII bracketing system has consistently proven to be superior in performance, reliability, and value in the most wind-prone areas across the country.

Single FFIII Bracket Set Includes:

• Two – 3″ x 7″ bottom bases
• Two – 3″ x 7″ top faceplates
• Two – 13/16″ removable cantilevered rod arms
• “D” Clips to hold rod arm to base
• Cable ties to hold banner to base
• 10′ – 3/4″ stainless steel strapping with buckles

Note: Banding tool required for installation

FFIII BRACKET SETS USED AT THE SITE OF SUPER BOWL 50!

Adjustable, Double Base Bracket System

FIBREFLEX II

Single Base System

The FibreFlex II offers all the features of the FibreFlex III, but is not adjustable.

For banners 30″x60″ and larger.

May be mounted to either metal or wooden poles.

Wide base is adaptable to wooden poles where either strapping or bolts can secure the base to the pole.

Note: Wooden poles may require more strapping than comes standard with this bracket.

Single FFII Bracket Set Includes:

• Two – 3″ x 7″ aluminum bases
• Two – 13/16″ removable cantilevered rod arms
• “D” Clips to hold rod arm to the base
• Cable ties to hold a banner to base
• 10′ – 3/4″ stainless steel strapping with buckles

Note: Banding tool required for installation

FIBREFLEX I

Single Base System

The first generation of FibreFlex Bannerware. Ideal for 30″x60″ and small banners installed on metal or concrete poles. Not recommended on wooden poles for banners larger than 30″x60″.

Single FFI Bracket Set Includes:

• Two – 2″ x 6″ aluminum bases
• Two – 13/16″ removable cantilevered rod arms
• “D” clips to hold rod arm to base
• Cable ties to hold banner to base
• 10′ – 3/4″ stainless steel strapping with buckles

Note: Banding tool required for installation

FIBREFLEX LL

Low Level Pole System

Designed Specifically for use on low-level decorative lamp posts using 18″x45″ and smaller banners.
The back of the aluminum base is channel shaped to fit into grooves of fluted lamp posts.

Single FFLL Bracket Set Includes:

• Two – 1 3/4″ removable fiberglass rod arms
• “D” clips to hold rod arm to the base
• Cable ties to hold a banner to base
• 4 – Ideal bands

bannerware example for banner attachment

SPRING-LOADED WIND-SPILLING BRACKET

Call for Pricing and warranty Information

HOW TO USE BAND-IT BANDING TOOL FOR PRMANENT BANDING INSTALLATION

How to Use the Steel Banding Tool ISO T001

Follow these steps for safe, secure installation of banner hardware using the steel banding tool:

Insert buckle: Insert buckle on band ears away from installer.
Bend and wrap: Bend end of band under buckle and wrap object, bringing band through buckle.
Insert in tool: Insert band in tool nose slot, and slide with thumb on band gripper lever.
Tighten: Turn the tool handle to tighten. Stop when the band ceases moving through the buckle.
Roll and reverse: Roll tool over buckle while reversing the handle one turn.
Cut band: Pull the handle to cut the band and remove the tool.
Finish assembly: Push band stub between the ears, then hammer to complete the assembly.

Frequently Asked Questions About Bannerware & Hardware

Choose reliable hardware to keep your pole banners secure and looking great season after season.
Below are common questions about Fibreflex® Brackets, banding hardware, wind-load considerations, and installation.
For more details, see our Bannerware page and related guides.

What comes in a typical banner hardware kit?

Standard kits include upper and lower Fibreflex® Brackets (arms), mounting plates, and fasteners.
Permanent installations often use stainless BAND-IT style banding (sold separately) for pole attachment.
See Bannerware for options.

Are Fibreflex® Brackets compatible with different pole sizes?

Yes. Fibreflex® Brackets work with common streetlight and utility pole diameters.
Choose the correct banding length and width for your pole size and follow torque guidelines.
Refer to our hardware specifications for sizing notes.

How do I permanently install brackets with a BAND-IT tool?

For permanent installs, use stainless banding and a BAND-IT banding tool to tension and lock the bands around the pole, then trim tails.
Watch the how-to video on our Bannerware page (BAND-IT tool video) for step-by-step guidance.

How do wind and weather affect hardware selection?

Wind exposure and banner size influence arm length, bracket selection, and recommended banding.
Use spring-loaded or flexible Fibreflex® arms to help shed wind loads and extend hardware life.
See our Banners for sizing considerations.

What maintenance do banner brackets need?

Inspect bands, buckles, and arms each season; re-tension or replace worn parts.
Clean hardware when changing banners and verify safety stops and end caps are intact.
For replacement parts, visit Bannerware.

Bannerware Overview ·
Pole Banners ·
Contact Us

OUR LATEST

News & Updates

250th Anniversary Banners

Celebrate in the City: 250 Years of the USA!

Highlight Summary: 250th USA Banners help cities, downtown districts, and community organizations celebrate America’s 250th anniversary with a coordinated look that feels festive, patriotic, and welcoming. In this post, you’ll get planning…

Hometown Heroes Military Tribute banners for VFW and American Legions

Hometown Heroes Banners

‘Tis the Season to Honor Our Military!

Highlight Summary: Honor Our Military With Banners to create a visible, community-wide tribute that recognizes service members, veterans, and military families in a meaningful way. This guide explains how to plan a banner program, choose the…

Celebrate 2026 with USA 250 Banners for Downtowns

Highlight Summary: USA 250 banners help cities, downtown districts, and local organizations celebrate America’s 250th anniversary in a way that feels unified, welcoming, and community-forward. In this guide, you’ll learn smart design ideas,…

Let’s start a Project Together!

MAINSTREET DESIGNS INC.

MainStreet Designs proudly serves cities, communities, and organizations across the United States. MainStreet Designs offers a selection of marine acrylic city banners, digital street pole banners printed on poly canvas & vinyl material, custom municipal banners, banner hardware, U.S. flags, & holiday decorations that create a beautiful downtown display. All our products are the perfect fit for your city, municipality, and main street. Contact one of our sales staff for questions and pricing.

Questions? Don’t hesitate to contact us!